Surface Tension / N/m → dyn/cm
Convert Newtons per meter to Dynes per centimeter
Convert interfacial force per unit length. Convert Newtons per meter (N/m) to Dynes per centimeter (dyn/cm). Find the formula, worked examples, unit definitions, and practical guidance below.
Reverse: Dynes per centimeter to Newtons per meter →
How to convert newtons per meter to dynes per centimeter
Surface tension depends on the interface, composition, and temperature. Force per length and surface energy per area have equivalent dimensions, but use the physical interpretation appropriate to your experiment.
Use x for the value in N/m, b for the intermediate value in N/m, and y for the result in dyn/cm.
dyn/cm = N/m ÷ 0.001
Worked examples
10 N/m ≈ 10000 dyn/cm
Step 1: (10 × 1) ≈ 10 N/m.
Step 2: 10 ÷ 0.001 ≈ 10000 dyn/cm.20 N/m ≈ 20000 dyn/cm
Step 1: (20 × 1) ≈ 20 N/m.
Step 2: 20 ÷ 0.001 ≈ 20000 dyn/cm.
Results are rounded to 12 significant digits. Converting units does not increase the precision of the original measurement. Very large or small values outside JavaScript’s finite numeric range are rejected.
About Newtons per meter
Newtons per meter (N/m) measures surface tension under the conventions above. The base value in N/m is (x × 1), where x is the numerical value in N/m. Factors shown here are rounded for display; calculations use the stored factor.
About Dynes per centimeter
Dynes per centimeter (dyn/cm) measures surface tension under the conventions above. The base value in N/m is (x × 0.001), where x is the numerical value in dyn/cm. Factors shown here are rounded for display; calculations use the stored factor.
Definitions and sources
Carry the same physical assumptions into subsequent physics calculations.
Newtons per meter to dynes per centimeter reference table
| Newtons per meter (N/m) | Dynes per centimeter (dyn/cm) |
|---|---|
| 1 | 1000 |
| 5 | 5000 |
| 10 | 10000 |
| 25 | 25000 |
| 50 | 50000 |
| 100 | 100000 |
| 1000 | 1000000 |
Browse every surface tension conversion →