Radiation / rad/s → Gy/h
Convert Rads per second to Grays per hour
Convert absorbed-dose rates, expressed as energy deposited per mass per time. Convert Rads per second (rad/s) to Grays per hour (Gy/h). Find the formula, worked examples, unit definitions, and practical guidance below.
Reverse: Grays per hour to Rads per second →
How to convert rads per second to grays per hour
Radiation here means absorbed-dose rate in Gy/s. It is not radioactivity, exposure, or equivalent-dose rate. Sieverts per time require radiation weighting and cannot be equated to grays per time.
Use x for the value in rad/s, b for the intermediate value in Gy/s, and y for the result in Gy/h.
Gy/h = rad/s × 0.01 ÷ 0.0002777777777777778
Worked examples
10 rad/s ≈ 360 Gy/h
Step 1: (10 × 0.01) ≈ 0.1 Gy/s.
Step 2: 0.1 ÷ 0.000277777777778 ≈ 360 Gy/h.20 rad/s ≈ 720 Gy/h
Step 1: (20 × 0.01) ≈ 0.2 Gy/s.
Step 2: 0.2 ÷ 0.000277777777778 ≈ 720 Gy/h.
Results are rounded to 12 significant digits. Converting units does not increase the precision of the original measurement. Very large or small values outside JavaScript’s finite numeric range are rejected.
About Rads per second
Rads per second (rad/s) measures radiation under the conventions above. The base value in Gy/s is (x × 0.01), where x is the numerical value in rad/s. Factors shown here are rounded for display; calculations use the stored factor.
About Grays per hour
Grays per hour (Gy/h) measures radiation under the conventions above. The base value in Gy/s is (x × 0.000277777777778), where x is the numerical value in Gy/h. Factors shown here are rounded for display; calculations use the stored factor.
Definitions and sources
Carry the same physical assumptions into subsequent physics calculations.
Rads per second to grays per hour reference table
| Rads per second (rad/s) | Grays per hour (Gy/h) |
|---|---|
| 1 | 36 |
| 5 | 180 |
| 10 | 360 |
| 25 | 900 |
| 50 | 1800 |
| 100 | 3600 |
| 1000 | 36000 |
Browse every radiation conversion →