Skip to content
ExactUnit

Pressure / psi → Torr

Convert Pounds-force per square inch to Torr

Convert pressure differences or absolute pressures between consistent units. Convert Pounds-force per square inch (psi) to Torr (Torr). Find the formula, worked examples, unit definitions, and practical guidance below.

Reverse: Torr to Pounds-force per square inch →

Unit converter
Edit either value
1 psi = 51.7149325715 Torr

Results rounded to 12 significant digits.

How to convert pounds-force per square inch to torr

This changes units only. Gauge and absolute pressures need a known ambient pressure to relate them; the converter does not add atmospheric pressure.

Use x for the value in psi, b for the intermediate value in Pa, and y for the result in Torr.

Torr = psi × 6894.757293168361 ÷ 133.32236842105263

Worked examples

  • 10 psi ≈ 517.149325715 Torr

    Step 1: (10 × 6894.75729317) ≈ 68947.5729317 Pa.
    Step 2: 68947.5729317 ÷ 133.322368421 ≈ 517.149325715 Torr.

  • 20 psi ≈ 1034.29865143 Torr

    Step 1: (20 × 6894.75729317) ≈ 137895.145863 Pa.
    Step 2: 137895.145863 ÷ 133.322368421 ≈ 1034.29865143 Torr.

Results are rounded to 12 significant digits. Converting units does not increase the precision of the original measurement. Very large or small values outside JavaScript’s finite numeric range are rejected.

About Pounds-force per square inch

Pounds-force per square inch (psi) measures pressure under the conventions above. The base value in Pa is (x × 6894.75729317), where x is the numerical value in psi. Factors shown here are rounded for display; calculations use the stored factor.

About Torr

Torr (Torr) measures pressure under the conventions above. The base value in Pa is (x × 133.322368421), where x is the numerical value in Torr. Factors shown here are rounded for display; calculations use the stored factor.

Definitions and sources

Carry the same physical assumptions into subsequent physics calculations.

Pounds-force per square inch to torr reference table

Common pounds-force per square inch values converted to torr
Pounds-force per square inch (psi)Torr (Torr)
151.7149325715
5258.574662858
10517.149325715
251292.87331429
502585.74662858
1005171.49325715
100051714.9325715

Browse every pressure conversion →

Popular conversions

A shortcut to your next answer