Skip to content
ExactUnit

Pressure / psi → kPa

Convert Pounds-force per square inch to Kilopascals

Convert pressure differences or absolute pressures between consistent units. Convert Pounds-force per square inch (psi) to Kilopascals (kPa). Find the formula, worked examples, unit definitions, and practical guidance below.

Reverse: Kilopascals to Pounds-force per square inch →

Unit converter
Edit either value
1 psi = 6.89475729317 kPa

Results rounded to 12 significant digits.

How to convert pounds-force per square inch to kilopascals

This changes units only. Gauge and absolute pressures need a known ambient pressure to relate them; the converter does not add atmospheric pressure.

Use x for the value in psi, b for the intermediate value in Pa, and y for the result in kPa.

kPa = psi × 6894.757293168361 ÷ 1000

Worked examples

  • 10 psi ≈ 68.9475729317 kPa

    Step 1: (10 × 6894.75729317) ≈ 68947.5729317 Pa.
    Step 2: 68947.5729317 ÷ 1000 ≈ 68.9475729317 kPa.

  • 20 psi ≈ 137.895145863 kPa

    Step 1: (20 × 6894.75729317) ≈ 137895.145863 Pa.
    Step 2: 137895.145863 ÷ 1000 ≈ 137.895145863 kPa.

Results are rounded to 12 significant digits. Converting units does not increase the precision of the original measurement. Very large or small values outside JavaScript’s finite numeric range are rejected.

About Pounds-force per square inch

Pounds-force per square inch (psi) measures pressure under the conventions above. The base value in Pa is (x × 6894.75729317), where x is the numerical value in psi. Factors shown here are rounded for display; calculations use the stored factor.

About Kilopascals

Kilopascals (kPa) measures pressure under the conventions above. The base value in Pa is (x × 1000), where x is the numerical value in kPa. Factors shown here are rounded for display; calculations use the stored factor.

Definitions and sources

Carry the same physical assumptions into subsequent physics calculations.

Pounds-force per square inch to kilopascals reference table

Common pounds-force per square inch values converted to kilopascals
Pounds-force per square inch (psi)Kilopascals (kPa)
16.89475729317
534.4737864658
1068.9475729317
25172.368932329
50344.737864658
100689.475729317
10006894.75729317

Browse every pressure conversion →

Popular conversions

A shortcut to your next answer