Permeability / ng/(m²·s·Pa) → kg/(m²·s·Pa)
Convert Nanograms per square meter second pascal to Kilograms per square meter second pascal
Convert water-vapor permeance, the mass transmission rate per area and pressure difference. Convert Nanograms per square meter second pascal (ng/(m²·s·Pa)) to Kilograms per square meter second pascal (kg/(m²·s·Pa)). Find the formula, worked examples, unit definitions, and practical guidance below.
Reverse: Kilograms per square meter second pascal to Nanograms per square meter second pascal →
How to convert nanograms per square meter second pascal to kilograms per square meter second pascal
This family uses vapor permeance, kg/(m²·s·Pa). The US perm factor is the conventional value at 0 °C, rounded per NIST. Material permeability requires thickness; perm-inch and porous-medium permeability in darcy or m² are excluded.
Use x for the value in ng/(m²·s·Pa), b for the intermediate value in kg/(m²·s·Pa), and y for the result in kg/(m²·s·Pa).
kg/(m²·s·Pa) = ng/(m²·s·Pa) × 1e-12
Worked examples
10 ng/(m²·s·Pa) ≈ 1e-11 kg/(m²·s·Pa)
Step 1: (10 × 1e-12) ≈ 1e-11 kg/(m²·s·Pa).
Step 2: 1e-11 ÷ 1 ≈ 1e-11 kg/(m²·s·Pa).20 ng/(m²·s·Pa) ≈ 2e-11 kg/(m²·s·Pa)
Step 1: (20 × 1e-12) ≈ 2e-11 kg/(m²·s·Pa).
Step 2: 2e-11 ÷ 1 ≈ 2e-11 kg/(m²·s·Pa).
Results are rounded to 12 significant digits. Converting units does not increase the precision of the original measurement. Very large or small values outside JavaScript’s finite numeric range are rejected.
About Nanograms per square meter second pascal
Nanograms per square meter second pascal (ng/(m²·s·Pa)) measures permeability under the conventions above. The base value in kg/(m²·s·Pa) is (x × 1e-12), where x is the numerical value in ng/(m²·s·Pa). Factors shown here are rounded for display; calculations use the stored factor.
About Kilograms per square meter second pascal
Kilograms per square meter second pascal (kg/(m²·s·Pa)) measures permeability under the conventions above. The base value in kg/(m²·s·Pa) is (x × 1), where x is the numerical value in kg/(m²·s·Pa). Factors shown here are rounded for display; calculations use the stored factor.
Definitions and sources
Carry the same physical assumptions into subsequent physics calculations.
Nanograms per square meter second pascal to kilograms per square meter second pascal reference table
| Nanograms per square meter second pascal (ng/(m²·s·Pa)) | Kilograms per square meter second pascal (kg/(m²·s·Pa)) |
|---|---|
| 1 | 1e-12 |
| 5 | 5e-12 |
| 10 | 1e-11 |
| 25 | 2.5e-11 |
| 50 | 5e-11 |
| 100 | 1e-10 |
| 1000 | 1e-9 |
Browse every permeability conversion →