Mass Flux Density / g/(cm²·s) → lb/(ft²·s)
Convert Grams per square centimeter second to Pounds per square foot second
Convert mass flow per unit cross-sectional area. Convert Grams per square centimeter second (g/(cm²·s)) to Pounds per square foot second (lb/(ft²·s)). Find the formula, worked examples, unit definitions, and practical guidance below.
Reverse: Pounds per square foot second to Grams per square centimeter second →
How to convert grams per square centimeter second to pounds per square foot second
Mass flux combines mass flow and area. Keep the area normal to the flow and use the same signed-direction convention when comparing data.
Use x for the value in g/(cm²·s), b for the intermediate value in kg/(m²·s), and y for the result in lb/(ft²·s).
lb/(ft²·s) = g/(cm²·s) × 10 ÷ 4.88242763638305
Worked examples
10 g/(cm²·s) ≈ 20.4816143623 lb/(ft²·s)
Step 1: (10 × 10) ≈ 100 kg/(m²·s).
Step 2: 100 ÷ 4.88242763638 ≈ 20.4816143623 lb/(ft²·s).20 g/(cm²·s) ≈ 40.9632287245 lb/(ft²·s)
Step 1: (20 × 10) ≈ 200 kg/(m²·s).
Step 2: 200 ÷ 4.88242763638 ≈ 40.9632287245 lb/(ft²·s).
Results are rounded to 12 significant digits. Converting units does not increase the precision of the original measurement. Very large or small values outside JavaScript’s finite numeric range are rejected.
About Grams per square centimeter second
Grams per square centimeter second (g/(cm²·s)) measures mass flux density under the conventions above. The base value in kg/(m²·s) is (x × 10), where x is the numerical value in g/(cm²·s). Factors shown here are rounded for display; calculations use the stored factor.
About Pounds per square foot second
Pounds per square foot second (lb/(ft²·s)) measures mass flux density under the conventions above. The base value in kg/(m²·s) is (x × 4.88242763638), where x is the numerical value in lb/(ft²·s). Factors shown here are rounded for display; calculations use the stored factor.
Definitions and sources
Carry the same physical assumptions into subsequent physics calculations.
Grams per square centimeter second to pounds per square foot second reference table
| Grams per square centimeter second (g/(cm²·s)) | Pounds per square foot second (lb/(ft²·s)) |
|---|---|
| 1 | 2.04816143623 |
| 5 | 10.2408071811 |
| 10 | 20.4816143623 |
| 25 | 51.2040359056 |
| 50 | 102.408071811 |
| 100 | 204.816143623 |
| 1000 | 2048.16143623 |
Browse every mass flux density conversion →