Flow / L/s → m³/s
Convert Liters per second to Cubic meters per second
Convert volumetric flow rates for liquids and gases. Convert Liters per second (L/s) to Cubic meters per second (m³/s). Find the formula, worked examples, unit definitions, and practical guidance below.
Reverse: Cubic meters per second to Liters per second →
How to convert liters per second to cubic meters per second
Gas volumes must refer to the same temperature and pressure. Standard and actual cubic flow rates cannot be equated without state information; US gallons here are liquid gallons.
Use x for the value in L/s, b for the intermediate value in m³/s, and y for the result in m³/s.
m³/s = L/s × 0.001
Worked examples
10 L/s ≈ 0.01 m³/s
Step 1: (10 × 0.001) ≈ 0.01 m³/s.
Step 2: 0.01 ÷ 1 ≈ 0.01 m³/s.20 L/s ≈ 0.02 m³/s
Step 1: (20 × 0.001) ≈ 0.02 m³/s.
Step 2: 0.02 ÷ 1 ≈ 0.02 m³/s.
Results are rounded to 12 significant digits. Converting units does not increase the precision of the original measurement. Very large or small values outside JavaScript’s finite numeric range are rejected.
About Liters per second
Liters per second (L/s) measures flow under the conventions above. The base value in m³/s is (x × 0.001), where x is the numerical value in L/s. Factors shown here are rounded for display; calculations use the stored factor.
About Cubic meters per second
Cubic meters per second (m³/s) measures flow under the conventions above. The base value in m³/s is (x × 1), where x is the numerical value in m³/s. Factors shown here are rounded for display; calculations use the stored factor.
Definitions and sources
Carry the same physical assumptions into subsequent physics calculations.
Liters per second to cubic meters per second reference table
| Liters per second (L/s) | Cubic meters per second (m³/s) |
|---|---|
| 1 | 0.001 |
| 5 | 0.005 |
| 10 | 0.01 |
| 25 | 0.025 |
| 50 | 0.05 |
| 100 | 0.1 |
| 1000 | 1 |
Browse every flow conversion →