Electric Conductivity / S/m → S/cm
Convert Siemens per meter to Siemens per centimeter
Convert material electrical conductivity in siemens per length. Convert Siemens per meter (S/m) to Siemens per centimeter (S/cm). Find the formula, worked examples, unit definitions, and practical guidance below.
Reverse: Siemens per centimeter to Siemens per meter →
How to convert siemens per meter to siemens per centimeter
Conductivity is the reciprocal of resistivity. Fluid conductivity often depends strongly on temperature and composition; unit conversion does not compensate for either.
Use x for the value in S/m, b for the intermediate value in S/m, and y for the result in S/cm.
S/cm = S/m ÷ 100
Worked examples
10 S/m ≈ 0.1 S/cm
Step 1: (10 × 1) ≈ 10 S/m.
Step 2: 10 ÷ 100 ≈ 0.1 S/cm.20 S/m ≈ 0.2 S/cm
Step 1: (20 × 1) ≈ 20 S/m.
Step 2: 20 ÷ 100 ≈ 0.2 S/cm.
Results are rounded to 12 significant digits. Converting units does not increase the precision of the original measurement. Very large or small values outside JavaScript’s finite numeric range are rejected.
About Siemens per meter
Siemens per meter (S/m) measures electric conductivity under the conventions above. The base value in S/m is (x × 1), where x is the numerical value in S/m. Factors shown here are rounded for display; calculations use the stored factor.
About Siemens per centimeter
Siemens per centimeter (S/cm) measures electric conductivity under the conventions above. The base value in S/m is (x × 100), where x is the numerical value in S/cm. Factors shown here are rounded for display; calculations use the stored factor.
Definitions and sources
Carry the same physical assumptions into subsequent physics calculations.
Siemens per meter to siemens per centimeter reference table
| Siemens per meter (S/m) | Siemens per centimeter (S/cm) |
|---|---|
| 1 | 0.01 |
| 5 | 0.05 |
| 10 | 0.1 |
| 25 | 0.25 |
| 50 | 0.5 |
| 100 | 1 |
| 1000 | 10 |
Browse every electric conductivity conversion →