Sound / dB SPL → µPa RMS
Convert Decibels relative to reference pressure to Micropascals RMS
Convert RMS sound pressure and logarithmic pressure levels with an explicit reference. Convert Decibels relative to reference pressure (dB SPL) to Micropascals RMS (µPa RMS). Find the formula, worked examples, unit definitions, and practical guidance below.
Reverse: Micropascals RMS to Decibels relative to reference pressure →
How to convert decibels relative to reference pressure to micropascals rms
Default reference pressure is 20 µPa, the conventional air SPL reference. Values are unweighted RMS pressure levels, not dBA or sound intensity. Logarithmic levels may be negative; physical pressure must be positive. Changing the reference changes the reported level.
Use x for the value in dB SPL, b for the intermediate value in Pa RMS, and y for the result in µPa RMS.
b = p₀ × 10^(x ÷ 20); y = b ÷ 0.000001
Here p₀ = 0.00002 Pa. Static examples and tables use that default reference. The calculator supports another positive reference pressure.
Worked examples
10 dB SPL ≈ 63.2455532034 µPa RMS
Step 1: p₀ × 10^(10 ÷ 20) ≈ 0.0000632455532034 Pa RMS.
Step 2: 0.0000632455532034 ÷ 0.000001 ≈ 63.2455532034 µPa RMS.20 dB SPL ≈ 200 µPa RMS
Step 1: p₀ × 10^(20 ÷ 20) ≈ 0.0002 Pa RMS.
Step 2: 0.0002 ÷ 0.000001 ≈ 200 µPa RMS.
Results are rounded to 12 significant digits. Converting units does not increase the precision of the original measurement. Very large or small values outside JavaScript’s finite numeric range are rejected.
About Decibels relative to reference pressure
Decibels relative to reference pressure expresses a pressure ratio logarithmically: level = 20 × log₁₀(p/p₀). Here p is RMS pressure in pascals and p₀ is the selected reference pressure. Zero level means pressure equal to the reference, not silence.
About Micropascals RMS
Micropascals RMS (µPa RMS) measures sound under the conventions above. The base value in Pa RMS is (x × 0.000001), where x is the numerical value in µPa RMS. Factors shown here are rounded for display; calculations use the stored factor.
Definitions and sources
Carry the same physical assumptions into subsequent physics calculations.
Decibels relative to reference pressure to micropascals rms reference table
| Decibels relative to reference pressure (dB SPL) | Micropascals RMS (µPa RMS) |
|---|---|
| 1 | 22.440369086 |
| 2 | 25.1785082359 |
| 5 | 35.5655882008 |
| 10 | 63.2455532034 |
| 20 | 200 |
Browse every sound conversion →