Electric Field Strength / N/C → V/m
Convert Newtons per coulomb to Volts per meter
Convert electric field strength as potential gradient or force per charge. Convert Newtons per coulomb (N/C) to Volts per meter (V/m). Find the formula, worked examples, unit definitions, and practical guidance below.
Reverse: Volts per meter to Newtons per coulomb →
How to convert newtons per coulomb to volts per meter
One volt per meter equals one newton per coulomb. A potential difference in volts requires a distance and field geometry before it can define an electric field.
Use x for the value in N/C, b for the intermediate value in V/m, and y for the result in V/m.
V/m = N/C
Worked examples
10 N/C ≈ 10 V/m
Step 1: (10 × 1) ≈ 10 V/m.
Step 2: 10 ÷ 1 ≈ 10 V/m.20 N/C ≈ 20 V/m
Step 1: (20 × 1) ≈ 20 V/m.
Step 2: 20 ÷ 1 ≈ 20 V/m.
Results are rounded to 12 significant digits. Converting units does not increase the precision of the original measurement. Very large or small values outside JavaScript’s finite numeric range are rejected.
About Newtons per coulomb
Newtons per coulomb (N/C) measures electric field strength under the conventions above. The base value in V/m is (x × 1), where x is the numerical value in N/C. Factors shown here are rounded for display; calculations use the stored factor.
About Volts per meter
Volts per meter (V/m) measures electric field strength under the conventions above. The base value in V/m is (x × 1), where x is the numerical value in V/m. Factors shown here are rounded for display; calculations use the stored factor.
Definitions and sources
Carry the same physical assumptions into subsequent physics calculations.
Newtons per coulomb to volts per meter reference table
| Newtons per coulomb (N/C) | Volts per meter (V/m) |
|---|---|
| 1 | 1 |
| 5 | 5 |
| 10 | 10 |
| 25 | 25 |
| 50 | 50 |
| 100 | 100 |
| 1000 | 1000 |
Browse every electric field strength conversion →